February 25th, 2011
 |
|
Best Price :
Availability : Usually ships in 24 hours
|
-331 EPDM O-Ring, 70A Durometer, Black, 2-1/4″ ID, 2-5/8″ OD, 3/16″ Width (Pack of 25) Features
- Use EPDM in applications with temperature ranges from -70°F (-57°C) to 300°F (149°C)
- Compression set resistance (resilience) is good to excellent
- EPDM works well with water and steam to 300F, or more with special formulations, Silicone oil and grease, lots of polar solvents (alcohols), many acids, glycol-based brake fluids, ozone and outside weathering
- Incompatible with products containing mineral oils
|
Read the rest of this entry »
Tags: 214, 258, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
February 24th, 2011
 |
|
Best Price :$3.76
Offer Price : $1.25
Availability : Usually ships in 24 hours
|
-015 Silicone O-Ring, 70A Durometer, Red, 9/16″ ID, 11/16″ OD, 1/16″ Width (Pack of 5) Features
- Use silicone rubber in applications with temperature ranges from -65°F (-54°C) to 450°F (232°C)
- Compression set resistance (resilience) is excellent
- Silicone rubber has very good ozone, weather, detergent, and salt water resistance, and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons
- Inferior response to mechanical wear and tear, water/steam over 250°F (121°C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels, and only average water resistance
|
Read the rest of this entry »
Tags: 1116, Durometer, ORing, Silicone
Posted in
Small Parts |
Comments Off
February 20th, 2011
 |
|
Best Price :$7.82
Offer Price : $3.38
Availability : Usually ships in 24 hours
|
-210 PTFE O-Ring, 57A Durometer, White, 3/4″ ID, 1″ OD, 1/8″ Width (Pack of 10) Features
- Use PTFE in applications with temperature ranges from -328°F (-200°C) to 500°F (260°C)
- Poor compression set resistance (resilience)
- PTFE has excellent resistance to synthetic lubricants, hydrocarbons, acids, alkalies, detergents, alcohol, ketones, steam and refrigerants; good electrical resistance, compatible with outdoor applications, slides well against objects, tough against abrasion
- Incompatible with high vacuum seals, low compression vaccum sealing flanges and super-heated steam
|
Read the rest of this entry »
Tags: Durometer, ORing, White
Posted in
Small Parts |
Comments Off
February 19th, 2011
 |
|
Best Price :
Availability : Usually ships in 24 hours
|
-232 Fluorosilicon O-Ring, 70A Durometer, Blue, 2-3/4″ ID, 3″ OD, 1/8″ Width (Pack of 5) Features
- Use Fluorosilicon in applications with temperature ranges from -100°F (-73°C) to 350°F (177°C)
- Compression set resistance (resilience) is good
- Fluorosilicon has, like silicone, very good resistance to ozone, weather, detergent, and salt water and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons; and better mineral oil, fuel, and aromatic hydrocarbons (benzene) compatibility than silicone
- Like silicone, inferior response to mechanical wear and tear, water/steam over 250°F (121°C), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels; plus only average water resistance and doesn’t fare as well against heated air as silicone
|
Read the rest of this entry »
Tags: 234, Durometer, Fluorosilicon, ORing
Posted in
Small Parts |
Comments Off
February 13th, 2011
 |
|
Best Price :$8.37
Offer Price : $8.37
Availability : Usually ships in 24 hours
|
-117 PTFE O-Ring, 57A Durometer, White, 13/16″ ID, 1″ OD, 3/32″ Width (Pack of 10) Features
- Use PTFE in applications with temperature ranges from -328°F (-200°C) to 500°F (260°C)
- Poor compression set resistance (resilience)
- PTFE has excellent resistance to synthetic lubricants, hydrocarbons, acids, alkalies, detergents, alcohol, ketones, steam and refrigerants; good electrical resistance, compatible with outdoor applications, slides well against objects, tough against abrasion
- Incompatible with high vacuum seals, low compression vaccum sealing flanges and super-heated steam
|
Read the rest of this entry »
Tags: 1316, Durometer, ORing, White
Posted in
Small Parts |
Comments Off
February 4th, 2011
 |
|
Best Price :$9.20
Offer Price : $1.15
Availability : Usually ships in 24 hours
|
-219 Buna O-Ring, 70A Durometer, Black, 1-5/16″ ID, 1-9/16″ OD, 1/8″ Width (Pack of 100) Features
- Use nitrile rubber in applications with temperature ranges from -30°F (-34°C ) to 250°F (121°C)
- Compression set resistance (resilience) is good to excellent
- Nitrile rubber is universally available and compatible with petroleum, vegetable oil and other aliphatic hydrocarbons, HFA, HFB and HFC fluids, water, and is fairly resistant to abrasion
- Incompatible with chlorinated hydrocarbons (trichlorethylene), aromatic hydrocarbons (benzene), polar solvents (acetone), strong acids, ozone and direct weathering
|
Read the rest of this entry »
Tags: 1516, 1916, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
February 2nd, 2011
|
|
Best Price :$6.27
Offer Price : $4.75
Availability : Usually ships in 24 hours
|
-203 Viton O-Ring, 75A Durometer, Black, 5/16″ ID, 9/16″ OD, 1/8″ Width (Pack of 25) Features
- Use Viton in applications with temperature ranges from -15°F (-26°C) to 400°F (205°C)
- Compression set resistance (resilience) is excellent
- Viton is compatible with certain non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone and weathering
- Poor resistance to low molecular organic acids (formic, acetic), ammonia gas, alkalis, amines, glycol-based brake fluids, super-heated steam
|
Read the rest of this entry »
Tags: Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
January 31st, 2011
|
|
Best Price :$33.78
Offer Price : $33.78
Availability : Usually ships in 24 hours
|
-331 Viton O-Ring, 75A Durometer, Black, 2-1/4″ ID, 2-5/8″ OD, 3/16″ Width (Pack of 25) Features
- Use Viton in applications with temperature ranges from -15°F (-26°C) to 400°F (205°C)
- Compression set resistance (resilience) is excellent
- Viton is compatible with certain non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone and weathering
- Poor resistance to low molecular organic acids (formic, acetic), ammonia gas, alkalis, amines, glycol-based brake fluids, super-heated steam
|
Read the rest of this entry »
Tags: 214, 258, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
January 28th, 2011
|
|
Best Price :$4.97
Offer Price : $4.97
Availability : Usually ships in 24 hours
|
-333 Viton O-Ring, 75A Durometer, Black, 2-1/2″ ID, 2-7/8″ OD, 3/16″ Width (Pack of 1) Features
- Use Viton in applications with temperature ranges from -15°F (-26°C) to 400°F (205°C)
- Compression set resistance (resilience) is excellent
- Viton is compatible with certain non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone and weathering
- Poor resistance to low molecular organic acids (formic, acetic), ammonia gas, alkalis, amines, glycol-based brake fluids, super-heated steam
|
Read the rest of this entry »
Tags: 212, 278, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
January 27th, 2011
|
|
Best Price :$11.83
Offer Price : $11.83
Availability : Usually ships in 24 hours
|
-123 PTFE O-Ring, 57A Durometer, White, 1-3/16″ ID, 1-3/8″ OD, 3/32″ Width (Pack of 10) Features
- Use PTFE in applications with temperature ranges from -328°F (-200°C) to 500°F (260°C)
- Poor compression set resistance (resilience)
- PTFE has excellent resistance to synthetic lubricants, hydrocarbons, acids, alkalies, detergents, alcohol, ketones, steam and refrigerants; good electrical resistance, compatible with outdoor applications, slides well against objects, tough against abrasion
- Incompatible with high vacuum seals, low compression vaccum sealing flanges and super-heated steam
|
Read the rest of this entry »
Tags: 1183, 1316, 138, Durometer, ORing, White
Posted in
Small Parts |
Comments Off