March 20th, 2011
 |
|
Best Price :$9.18
Offer Price : $9.18
Availability : Usually ships in 24 hours
|
-130 Silicone O-Ring, 70A Durometer, Red, 1-5/8″ ID, 1-13/16″ OD, 3/32″ Width (Pack of 25) Features
- Use silicone rubber in applications with temperature ranges from -65°F (-54°C) to 450°F (232°C)
- Compression set resistance (resilience) is excellent
- Silicone rubber has very good ozone, weather, detergent, and salt water resistance, and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons
- Inferior response to mechanical wear and tear, water/steam over 250°F (121°C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels, and only average water resistance
|
Read the rest of this entry »
Tags: 11316, 158, Durometer, ORing, Silicone
Posted in
Small Parts |
Comments Off
March 18th, 2011
 |
|
Best Price :$26.13
Offer Price : $26.13
Availability : Usually ships in 24 hours
|
-242 Buna O-Ring, 70A Durometer, Black, 4″ ID, 4-1/4″ OD, 1/8″ Width (Pack of 100) Features
- Use nitrile rubber in applications with temperature ranges from -30°F (-34°C ) to 250°F (121°C)
- Compression set resistance (resilience) is good to excellent
- Nitrile rubber is universally available and compatible with petroleum, vegetable oil and other aliphatic hydrocarbons, HFA, HFB and HFC fluids, water, and is fairly resistant to abrasion
- Incompatible with chlorinated hydrocarbons (trichlorethylene), aromatic hydrocarbons (benzene), polar solvents (acetone), strong acids, ozone and direct weathering
|
Read the rest of this entry »
Tags: 414, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
March 15th, 2011
|
|
Best Price :
Availability : Usually ships in 24 hours
|
-340 Buna O-Ring, 70A Durometer, Black, 3-3/8″ ID, 3-3/4″ OD, 3/16″ Width (Pack of 50) Features
- Use nitrile rubber in applications with temperature ranges from -30°F (-34°C ) to 250°F (121°C)
- Compression set resistance (resilience) is good to excellent
- Nitrile rubber is universally available and compatible with petroleum, vegetable oil and other aliphatic hydrocarbons, HFA, HFB and HFC fluids, water, and is fairly resistant to abrasion
- Incompatible with chlorinated hydrocarbons (trichlorethylene), aromatic hydrocarbons (benzene), polar solvents (acetone), strong acids, ozone and direct weathering
|
Read the rest of this entry »
Tags: 334, 338, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
March 12th, 2011
 |
|
Best Price :
Availability : Usually ships in 24 hours
|
-024 Fluorosilicon O-Ring, 70A Durometer, Blue, 1-1/8″ ID, 1-1/4″ OD, 1/16″ Width (Pack of 100) Features
- Use Fluorosilicon in applications with temperature ranges from -100°F (-73°C) to 350°F (177°C)
- Compression set resistance (resilience) is good
- Fluorosilicon has, like silicone, very good resistance to ozone, weather, detergent, and salt water and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons; and better mineral oil, fuel, and aromatic hydrocarbons (benzene) compatibility than silicone
- Like silicone, inferior response to mechanical wear and tear, water/steam over 250°F (121°C), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels; plus only average water resistance and doesn’t fare as well against heated air as silicone
|
Read the rest of this entry »
Tags: 114, 118, Durometer, Fluorosilicon, ORing
Posted in
Small Parts |
Comments Off
March 11th, 2011
|
|
Best Price :$3.57
Offer Price : $1.25
Availability : Usually ships in 24 hours
|
-118 EPDM O-Ring, 70A Durometer, Black, 7/8″ ID, 1-1/16″ OD, 3/32″ Width (Pack of 25) Features
- Use EPDM in applications with temperature ranges from -70°F (-57°C) to 300°F (149°C)
- Compression set resistance (resilience) is good to excellent
- EPDM works well with water and steam to 300F, or more with special formulations, Silicone oil and grease, lots of polar solvents (alcohols), many acids, glycol-based brake fluids, ozone and outside weathering
- Incompatible with products containing mineral oils
|
Read the rest of this entry »
Tags: 1116, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
March 10th, 2011
 |
|
Best Price :$56.44
Offer Price : $56.44
Availability : Usually ships in 24 hours
|
-333 PTFE O-Ring, 57A Durometer, White, 2-1/2″ ID, 2-7/8″ OD, 3/16″ Width (Pack of 25) Features
- Use PTFE in applications with temperature ranges from -328°F (-200°C) to 500°F (260°C)
- Poor compression set resistance (resilience)
- PTFE has excellent resistance to synthetic lubricants, hydrocarbons, acids, alkalies, detergents, alcohol, ketones, steam and refrigerants; good electrical resistance, compatible with outdoor applications, slides well against objects, tough against abrasion
- Incompatible with high vacuum seals, low compression vaccum sealing flanges and super-heated steam
|
Read the rest of this entry »
Tags: 212, 278, 5644, Durometer, ORing, White
Posted in
Small Parts |
Comments Off
March 8th, 2011
|
|
Best Price :$7.28
Offer Price : $5.40
Availability : Usually ships in 24 hours
|
-328 Silicone O-Ring, 70A Durometer, Red, 1-7/8″ ID, 2-1/4″ OD, 3/16″ Width (Pack of 10) Features
- Use silicone rubber in applications with temperature ranges from -65°F (-54°C) to 450°F (232°C)
- Compression set resistance (resilience) is excellent
- Silicone rubber has very good ozone, weather, detergent, and salt water resistance, and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons
- Inferior response to mechanical wear and tear, water/steam over 250°F (121°C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels, and only average water resistance
|
Read the rest of this entry »
Tags: 178, 214, Durometer, ORing, Silicone
Posted in
Small Parts |
Comments Off
March 7th, 2011
|
|
Best Price :$6.53
Offer Price : $2.13
Availability : Usually ships in 24 hours
|
-034 PTFE O-Ring, 57A Durometer, White, 2-1/8″ ID, 2-1/4″ OD, 1/16″ Width (Pack of 5) Features
- Use PTFE in applications with temperature ranges from -328°F (-200°C) to 500°F (260°C)
- Poor compression set resistance (resilience)
- PTFE has excellent resistance to synthetic lubricants, hydrocarbons, acids, alkalies, detergents, alcohol, ketones, steam and refrigerants; good electrical resistance, compatible with outdoor applications, slides well against objects, tough against abrasion
- Incompatible with high vacuum seals, low compression vaccum sealing flanges and super-heated steam
|
Read the rest of this entry »
Tags: 214, 218, Durometer, ORing, White
Posted in
Small Parts |
Comments Off
March 5th, 2011
|
|
Best Price :$6.18
Offer Price : $1.28
Availability : Usually ships in 24 hours
|
-321 Silicone O-Ring, 70A Durometer, Red, 1-3/16″ ID, 1-9/16″ OD, 3/16″ Width (Pack of 10) Features
- Use silicone rubber in applications with temperature ranges from -65°F (-54°C) to 450°F (232°C)
- Compression set resistance (resilience) is excellent
- Silicone rubber has very good ozone, weather, detergent, and salt water resistance, and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons
- Inferior response to mechanical wear and tear, water/steam over 250°F (121°C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels, and only average water resistance
|
Read the rest of this entry »
Tags: 1316, 1916, Durometer, ORing, Silicone
Posted in
Small Parts |
Comments Off
February 26th, 2011
|
|
Best Price :
Availability : Usually ships in 24 hours
|
-230 Fluorosilicon O-Ring, 70A Durometer, Blue, 2-1/2″ ID, 2-3/4″ OD, 1/8″ Width (Pack of 5) Features
- Use Fluorosilicon in applications with temperature ranges from -100°F (-73°C) to 350°F (177°C)
- Compression set resistance (resilience) is good
- Fluorosilicon has, like silicone, very good resistance to ozone, weather, detergent, and salt water and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons; and better mineral oil, fuel, and aromatic hydrocarbons (benzene) compatibility than silicone
- Like silicone, inferior response to mechanical wear and tear, water/steam over 250°F (121°C), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels; plus only average water resistance and doesn’t fare as well against heated air as silicone
|
Read the rest of this entry »
Tags: 212, 234, Durometer, Fluorosilicon, ORing
Posted in
Small Parts |
Comments Off