May 25th, 2010
 |
|
Best Price :
Availability : Usually ships in 24 hours
|
-387 EPDM O-Ring, 70A Durometer, Black, 18″ ID, 18-3/8″ OD, 3/16″ Width (Pack of 5) Features
- Use EPDM in applications with temperature ranges from -70°F (-57°C) to 300°F (149°C)
- Compression set resistance (resilience) is good to excellent
- EPDM works well with water and steam to 300F, or more with special formulations, Silicone oil and grease, lots of polar solvents (alcohols), many acids, glycol-based brake fluids, ozone and outside weathering
- Incompatible with products containing mineral oils
|
Read the rest of this entry »
Tags: 1838, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
May 24th, 2010
![]() |
|
Best Price :
Availability : Usually ships in 1-2 business days
|
Read the rest of this entry »
Tags: ORing
Posted in
OringsUSA |
Comments Off
May 22nd, 2010
|
|
Best Price :$19.27
Offer Price : $16.46
Availability : Usually ships in 24 hours
|
-244 Viton O-Ring, 75A Durometer, Black, 4-1/4″ ID, 4-1/2″ OD, 1/8″ Width (Pack of 10) Features
- Use Viton in applications with temperature ranges from -15°F (-26°C) to 400°F (205°C)
- Compression set resistance (resilience) is excellent
- Viton is compatible with certain non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone and weathering
- Poor resistance to low molecular organic acids (formic, acetic), ammonia gas, alkalis, amines, glycol-based brake fluids, super-heated steam
|
Read the rest of this entry »
Tags: 412, 414, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
May 21st, 2010
|
|
Best Price :$13.41
Offer Price : $13.41
Availability : Usually ships in 24 hours
|
-147 Buna O-Ring, 70A Durometer, Black, 2-11/16″ ID, 2-7/8″ OD, 3/32″ Width (Pack of 100) Features
- Use nitrile rubber in applications with temperature ranges from -30°F (-34°C ) to 250°F (121°C)
- Compression set resistance (resilience) is good to excellent
- Nitrile rubber is universally available and compatible with petroleum, vegetable oil and other aliphatic hydrocarbons, HFA, HFB and HFC fluids, water, and is fairly resistant to abrasion
- Incompatible with chlorinated hydrocarbons (trichlorethylene), aromatic hydrocarbons (benzene), polar solvents (acetone), strong acids, ozone and direct weathering
|
Read the rest of this entry »
Tags: 1341, 21116, 278, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
May 20th, 2010
 |
|
Best Price :
Availability : Usually ships in 6-10 business days
|
Gauge Guard Isolator Sanitary Gasket, PTFE, 2″ Clamp Size Features
- Gauge Guard Gaskets and Caps
- Simple accessories to protect your delicate pressure gauge
- Part Number: AO-3056588
- Package Quantity: EA
|
Read the rest of this entry »
Tags: 1000mm, Cameras, D300s, Digital, Gasket, Isolator, Mirror, Monopod, Rokinon, Sanitary, Teleconverter, Telephoto
Posted in
Cole-Parmer |
Comments Off
May 19th, 2010
![]() |
|
Best Price :
Availability : Usually ships in 1-2 business days
|
Read the rest of this entry »
Tags: Nitrile, ORing
Posted in
OringsUSA |
Comments Off
May 17th, 2010
 |
|
Best Price :$4.10
Offer Price : $4.10
Availability : Usually ships in 24 hours
|
-103 Silicone O-Ring, 70A Durometer, Red, 3/32″ ID, 9/32″ OD, 3/32″ Width (Pack of 10) Features
- Use silicone rubber in applications with temperature ranges from -65°F (-54°C) to 450°F (232°C)
- Compression set resistance (resilience) is excellent
- Silicone rubber has very good ozone, weather, detergent, and salt water resistance, and also gives good results in presence of engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, high molecular weight chlorinated aromatic hydrocarbons
- Inferior response to mechanical wear and tear, water/steam over 250°F (121°C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels, and only average water resistance
|
Read the rest of this entry »
Tags: Durometer, ORing, Silicone
Posted in
Small Parts |
Comments Off
May 16th, 2010
![]() |
|
Best Price :
Availability : Usually ships in 1-2 business days
|
Read the rest of this entry »
Tags: ORing
Posted in
OringsUSA |
Comments Off
May 15th, 2010
|
|
Best Price :$5.65
Offer Price : $5.65
Availability : Usually ships in 24 hours
|
-020 EPDM O-Ring, 70A Durometer, Black, 7/8″ ID, 1″ OD, 1/16″ Width (Pack of 100) Features
- Use EPDM in applications with temperature ranges from -70°F (-57°C) to 300°F (149°C)
- Compression set resistance (resilience) is good to excellent
- EPDM works well with water and steam to 300F, or more with special formulations, Silicone oil and grease, lots of polar solvents (alcohols), many acids, glycol-based brake fluids, ozone and outside weathering
- Incompatible with products containing mineral oils
|
Read the rest of this entry »
Tags: Black, Durometer, ORing
Posted in
Small Parts |
Comments Off
May 14th, 2010
|
|
Best Price :
Availability : Usually ships in 24 hours
|
-315 EPDM O-Ring, 70A Durometer, Black, 13/16″ ID, 1-3/16″ OD, 3/16″ Width (Pack of 50) Features
- Use EPDM in applications with temperature ranges from -70°F (-57°C) to 300°F (149°C)
- Compression set resistance (resilience) is good to excellent
- EPDM works well with water and steam to 300F, or more with special formulations, Silicone oil and grease, lots of polar solvents (alcohols), many acids, glycol-based brake fluids, ozone and outside weathering
- Incompatible with products containing mineral oils
|
Read the rest of this entry »
Tags: 1316, Black, Durometer, ORing
Posted in
Small Parts |
Comments Off